Conference Proceedings
Session 1 - Steel challenges on the Energy Transition (1)
- A01 - Mitigation of hydrogen environment embrittlement of carbon steels A106 and A333 by addition of CO to H2 gas and its gas pressure dependence
- A02 - Effects of a mixture Hydrogen/Natural Gas on fatigue crack initiation and short crack propagation of a low-alloyed steel
- A03 - Mechanical performance of subsea pipeline steels for hydrogen transport application
- A04 - Development of a test setup to use miniature specimens for characterizing fracture toughness of line pipe steels under hydrogen gas
Session 2 - Hydrogen embrittlement on Ni alloys
- B01 - Overview on the implication of the hydrogen-metallurgical defects interactions in the hydrogen embrittlement mechanisms of nickel-base alloys
- B02 - Hydrogen effects on low cycle fatigue of IN718 at RT and 77K using the tubular specimen technique
- B03 - Hydrogen embrittlement of Ni and its alloys across the scales
Session 3 - Hydrogen embrittlement in steels for automotive industry (1)
- C01 - Optimizing the process parameters of hot stamped steels for improved hydrogen trapping ability
- C02 - On the right use of deuterium to characterize hydrogen uptake mechanisms in bare 22MnB5 steel
- C03 - Atmospheric Corrosion Induced Hydrogen: In-situ Monitoring in Coated and Bare AHSSs
- C04 - Hydrogen trapping efficiency of carbide nano-precipitates and their effect on hydrogen embrittlement susceptibility of single phase ferritic AHSS
Session 4 - Hydrogen embrittlement in additive manufactured parts
- D01 - Effect of hydrogen on the stress-relaxation properties of laser beam melted 17-4PH martensitic stainless steel
- D02 - Comparison of hydrogen environment-assisted cracking behavior in additively manufactured and wrought 17-4PH stainless steel
- D03 - Hydrogen embrittlement of cathodically pre-charged Inconel 718 fabricated via laser powder bed fusion
Session 5 - Advanced methods for characterization of hydrogen-microstructure interactions and hydrogen embrittlement
- E01 - Atom probe observation of hydrogen atoms in steel microstructures
- E02 - Implications of In-situ Electrochemical Micro-Cantilever Bending Test for the Interfacial Hydrogen Embrittlement Studies: Scientific Achievements and Experimental Limitations
- E03 - Interpretations on the hydrogen-induced cracking mechanism in sour media using H-pressure probe studies
- E04 - The role of carbon distribution in ultra-low carbon steel on the hydrogen trapping characteristics
Session 6 - Modelling and simulation (1)
- F01 - A phase field framework for predicting hydrogen assisted failures
- F02 - Hydrogen trapping at retained austenite evaluated in Quenched & Partitioning (Q&P) steel - Part II: Simulation results
- F03 - Dependency of internal hydrogen embrittlement on the hydrogen distribution in industrial DP600 dual phase steel
Session 7 - Surfaces and coating
- G01 - Surface Modification to Reduce the Hydrogen Penetration into Tempered Steel
- G02 - A better understanding of hydrogen absorption - desorption from Al-Si coated high strength steels during hot stamping process
- G03 - Analysis and Optimization of Hydrogen degassing heat treatments for electroplated components
Session 8 - Hydrogen embrittlement in non-ferrous metal
- H00 - Atomic-scale analysis of hydrogen embrittlement in high-strength Al alloys
- H01 - Microstructural characterization of two titanium alloys submitted to gaseous hydrogen under various conditions
- H02 - Implications for hydride formation in commercially pure titanium and their deformation mechanism
- H03 - Hydrogen diffusion and desorption characteristics of a CoCrFeMnNi high entropy and a CoCrNi medium entropy alloy
Session 9 - Hydrogen embrittlement in steels for automotive industry (2)
- I01 - Combined experimental - ab initio study of hydrogen embrittlement in a direct-quenched and partitioned medium-carbon 2 GPa steel
- I02 - The role of hydrogen in edge cracking of hot-dip galvanized AHSS sheets
- I03 - Corrosion-induced hydrogen evolution, absorption, and cracking behaviors of ultrastrong steel with Zn-based coatings
Session 10 - Hydrogen embrittlement in stainless steels
- J01 - Hydrogen absorption, diffusion and trapping in strained 316L: hydrogen distribution and effects on the mechanical behaviour
- J02 - Hydrogen-induced ductility loss of 17-4 PH stainless steel with internal hydrogen
- J03 - Diffusion and trapping of hydrogen in a 17-4 PH stainless steel: influence of heat treatment
- J04 - Assessment of the influence of hydrogen on the fatigue life of selective laser melted 316L austenitic stainless steels
Session 11 - Steel challenges on the energy transition: H economy (2)
- K01 - Fatigue crack growth properties of steels in high-pressure hydrogen gas environment
- K02 - Influence of Natural Gas / Hydrogen on the fatigue and fracture toughness properties of three pipeline steels
- K03 - Austenite stability and its effects on hydrogen induced degradation in austenitic stainless steels at cryogenic temperature
- K04 - Misconceptions of Hydrogen Degradation of Pipeline Steels in Existing Natural Gas Infrastructure
Session 12 - Modelling and simulation (2)
- L01 - Modelling hydrogen dragging by mobile dislocations
- L02 - Study of hydrogen embrittlement in steels using pressurized disks
- L03 - Atomistic Modelling of Hydrogen Trapping on Coherent and Semi-coherent Ti-based Carbonitrides and Mixed-Metal Carbides in bcc Fe
Session 13 - Hydrogen embrittlement in steels for various applications
- M01 - Exploration of Alternative High Strength Steel Microstructures for Hydrogen Embrittlement Resistance of Fasteners
- M02 - Evaluation of fracture toughness in sour environments through DCB and SENT testing
- M03 - The Effect of Tempered Martensite and Bainitic Microstructure on Hydrogen Embrittlement Susceptibility of 300M Grade Steel
- M04 - Screening the hydrogen embrittlement of novel high strength intermetallic strengthened steels
Session 14 - Posters on display during conference
- P002 - Regional supply chains for decarbonising steel: resource efficiency and green premium mitigation
- P004 - Joining Steel with No Heat Affected Zone. No Stress Riser. Resist Embrittlement.
- P006 - Heat Treatment and Notch Severity Effects on the UNS N07718 Alloy Susceptibility to Hydrogen Embrittlement Evaluated by the ISL Method
- P012 - Comparison of evaluation methods for hydrogen embrittlement sensitivity of high strength steels
- P014 - Influence of Hydrogen on fracture toughness of Advanced High Strength Steels
- P021 - Simulation of hydrogen thermal desorption spectra for iron with strain-Induced vacancy-type defects included
- P024 - Effect of Nickel on the hydrogen embrittlement, diffusion, and trapping properties of ferritic-martensitic dual-phase low alloy steel in tempered condition.
- P028 - Comparison of the fracture behavior of a quenched and tempered 42CrMo4 steel under gaseous pre-charging and in-situ hydrogen charging conditions.
- P031 - Assessment of hydrogen embrittlement of natural gas pipeline steels.
- P032 - Modelling hydrogen diffusion and trapping through a phase-field compatible formulation
- P033 - Correlation between the amount of sulfur segregation at grain boundaries and hydrogen induced ductility loss in pure nickel
- P036 - Evaluation of sensitivity of steels in H2 gas environment by using the hollow specimen test method
- P037 - Influence of sample preparation on the diffusible hydrogen analysis of aluminized hot stamped high strength steel
- P038 - Impact of hydrogen on press-hardened steels
- P042 - PVD-deposited barriers to reduce hydrogen uptake during hot stamping of Al-Si coated 22MnB5 steel
- P045 - The effect of low-temperature tempering and surface condition on hydrogen susceptibility of direct-quenched 500 HBW steel
- P046 - Equivalent hydrogen fugacity during electrochemical charging of nickel single crystal: comparison with gaseous hydrogen charging
- P048 - Hydrogen embrittlement in conventional versus additive manufactured 316L austenitic stainless steel
- P050 - Hydrogen trapping at retained austenite evaluated in Quenching & Partitioning (Q&P) steel – Part I: Experimental results
- P052 - Effect of the Concentration of H-Charging Solution on the Fatigue Crack Growth under Continuous- Hydrogen-Charging and its Consistency with the Testing in High-Pressure Hydrogen Gas
- P054 - Effect of Critical Hydrogen Concentration on the Mechanical Performance of 600-HBW Martensitic Ultra-High-Strength Steel
- P055 - Ab-initio insights into hydrogen-carbide interaction in steels combined with experiments
- P056 - Comparison of hydrogen embrittlement in conventionally cold rolled Ti 6Al 4V versus additive manufactured Ti 6Al 4V
- P057 - Impacts of mechanical fields on hydrogen transport in ITER divertor monoblocks
- P062 - Interaction H/vacancies in the vicinity of strained nickel surfaces
- P063 - Characterization of hydrogen-assisted degradation of a vintage and a modern pipeline steel
- P066 - Cathodic plasma electrolytic deposition of an aluminium oxide based hydrogen permeation barrier
- P067 - Prediction of hydrogen-modified ductile failure by a GTN coupled model
- P068 - mag weg - Microstructure dependent deformation-diffusion-damage framework for simulating hydrogen-assisted damage in metals
- P070 - Interaction between hydrogen and martensitic Fe-(Al)-C steels: the beneficial role of an Al-induced ferritic microfilm
- P071 - An overview of hydrogen consequences on plasticity mechanisms in nickel single crystals: some antagonists processes
- P075 - The implication of grain boundary character on the hydrogen diffusion and trapping mechanisms in nickel, and their contribution on the intergranular fracture assisted by hydrogen.
- P076 - Atomic-scale mechanism of hydrogen embrittlement in iron
- P077 - Experimental and numerical characterization of hydrogen diffusion in thick-walled submerged arc welded joint of S420G2+M offshore steel grade
- P079 - Reducing the Cost of Fatigue Crack Growth Testing for Storage Vessel Steels in Hydrogen Gas
- P080 - Detailed microstructural analysis and its correlation to hydrogen diffusion and trapping in a 300M high strength steel
- P084 - Effect of plastic deformation on the hydrogen-microstructure interactions of an API 5L steel grade
- P085 - Alloy and Composition Dependence of Hydrogen Embrittlement Susceptibility in High Strength Steel
- P086 - Screening the hydrogen barrier efficiency of new high entropy coatings via Deuterium charging
- P087 - Comparison of hydrogen diffusivities measured by electrochemical permeation and temperature-programmed desorption in cold-rolled pure iron
- P088 - Hydrogen Trapping and Diffusion Behavior in Additively Manufactured Stainless Steels
- P089 - Atom Probe Tomography and Its Application to the Analysis of Hydrogen
- P094 - Lattice diffusion of hydrogen in the precipitate Cr7C3
- P096 - Trapping and mechanical effects of hydrogen at ferrite-cementite interface in pearlitic steels
- P100 - The effect of Vanadium Carbides on hydrogen embrittlement resistance of spot welded cold formed high strength steels for automotive applications
- P102 - Towards understanding the influence of applied loading rate on the hydrogen environment-assisted cracking behavior of structural alloys
- P103 - Atomistic study of hydrogen behavior in Fe in presence of crystal defects
- P105 - Innovative methodology for the enameling steels characterization to fish-scale susceptibility.
- P106 - Testing of metallic and non-metallic material in gaseous hydrogen
- P107 - Lifetime prediction of subsea bolts in natural seawater
- P108 - Effects of Pre-Existing Hydrogen to Stress Triaxiality and Damage Evolution on Ultra High Strength Steel
- P109 - A study of hydrogen embrittlement mechanism for Zn coated high strength steel
- P110 - Hydrogen embrittlement evaluation of advanced high-strength steels (ahss)
- P111 - Fast deuterium screening by Inert Gas Fusion
- P112 - The Assessment of the Embrittlement Phenomenon of Cold Worked Stainless Steel in H2 Environment
- P113 - Utilization of hollow tensile specimen for investigating the impact of gaseous hydrogen in metallic materials
- P114 - MAG WEG - Hydrogen embrittlement of super duplex stainless steel in acid solution
- P116 - Thermodynamic and kinetic studies on the interplay of hydrogen with steel microstructures containing retained austenite
- P117 - Exploring the role of H-induced stress fields in hydrogen embrittlement by atomistic simulations
- P118 - Hydrogen degradation behavior of Inconel 625 investigated by monotonic tensile test equipped with acoustic emission and digital image correlation techniques
- P119 - Hydrogen absorption during industrial manufacturing of timber screws
- P120 - Modeling of hydrogen embrittlement using mixed nonlocal elements
- P121 - Hydrogen pipeline transport: Towards a better understanding of charging methods for the study of Hydrogen Embrittlement
- P122 - Characterization methodology of pipeline weld joints under hydrogen gas using miniature specimens
- P123 - Study of hydrogen embrittlement by steels using pressurized disks
- P124 - A modelling framework unifying hydrogen enhanced plasticity and decohesion
- P125 - Atomic insight into hydrogen-induced transgranular to intergranular fracture transition
- mag weg - mag weg
Download All Proceedings (PDF)